IDV67204
Latest River Heights for Blind Creek at Wantirna South
Issued at 08:53 AM AEDT Tuesday 21 October 2025
About river heights plots | About this Plot
Station details:Station Number: 586100 Name: Blind Creek at Wantirna South
Data from the previous 4 days.
| Date/Time | Water Level (m) |
| 20/10/2025 03:22 | 0.50 |
| 20/10/2025 03:28 | 0.53 |
| 20/10/2025 03:34 | 0.62 |
| 20/10/2025 03:40 | 0.70 |
| 20/10/2025 03:46 | 0.77 |
| 20/10/2025 03:52 | 0.83 |
| 20/10/2025 03:58 | 0.92 |
| 20/10/2025 04:04 | 0.98 |
| 20/10/2025 15:22 | 0.77 |
| 20/10/2025 15:28 | 0.77 |
| 20/10/2025 15:34 | 0.76 |
| 20/10/2025 23:10 | 0.53 |
| 20/10/2025 23:34 | 0.53 |
Data as Plot | Back to Bulletin
About this table
- The river height observations are real-time operational data, and received from a mixture of manual readings and automated telemetry systems.
- In most cases river heights are expressed in Local Gauge Height (LGH) which typically has a zero reading near the lowest water level reached during dry conditions. In many tidal areas, as well as for a few inland river gauges, river levels are stated in Australian Height Datum (AHD), which is approximately the height above mean sea level.
- The data is provided for flood warning purposes, and it is possible that some data will not be available during non-flood periods.
- Where provided, heights or depths above/below roads, bridges, dam spillways and weirs are given as a guide only.
- Where provided, Cease to flow (CTF) is the gauge height at which the river ceases to flow at a rockbar or weir.
- Most river height data is provided to the Bureau of Meteorology by other agencies. Use of these data is subject to the terms and conditions of the supplying organisations.
- Unless otherwise noted, all material on this page is licensed under the Creative Commons Attribution Australia Licence