Melbourne
17.12 Entitled diversion of allocated surface water to urban water system

The line item value for the 2012-13 year is (408,812 ML) which represents the volume of water diverted from surface water for urban water supply system under the various bulk entitlements held by Melbourne's retail water authorities. The volume reported includes:

• bulk water supplied by Melbourne Water to City West Water, South East Water, and Yarra Valley Water  from the Yarra, Tarago, and Bunyip rivers and to Western Water from the Melbourne Headworks system
• surface water diverted from the Maribyrnong and Werribee river basins by Western Water under various bulk entitlements; and surface water is primarily diverted from storages managed by Southern Rural Water, and also includeing diversions from smaller storages operated by Western Water.

Refer to line item 5.2 Surface water allocation remaining – urban water system for more information on these bulk entitlements.

The following table shows the volumes of surface water diverted for urban water supply by Melbourne Water and Western Water during the 2012–13 year. 

Total volume of allocated surface water diversions to the urban water system

Authority	Volume (ML)
Melbourne Water—bulk water supplied to retail water authorities	406,268
Western Water—surface water diverted from the Maribyrnong and Werribee rivers	2,544
Total	408,812

The volume of surface water diverted for bulk water supply by Melbourne Water is derived from the volume of water supplied to the retail authorities accounting for losses between the point of diversion and the point of supply to the authorities. This is explained in more detail in the quantification approach.

The volume of surface water diverted by Western Water is the metered volume at various offtake points. This is explained in more detail in the quantification approach.

The volume reported does not include water delivered by Melbourne Water to Gippsland Water (see 17.14 Surface water transfer under inter-region commitment).

Melbourne Water reports estimated proportions of water released from each of the seasonal reservoirs as an indication of the proportion of water intake from each reservoir to supply the total volume of bulk water (see following table).

Estimated proportions of water released from surface water storages

Release location	Percentage of total released
Cardinia	26%
Silvan	41%
Winneke	22%
Tarago	<1%
Yan Yean	<1%
Greenvale	9%
Yarra Valley (small treatment plants)	<1%
Total	100 %

Waterworks database.

Melbourne Water.

The total volume of surface water diverted for bulk water supply was calculated from the following two components:

• volume of potable and non-potable water supplied to the retail water authorities
  
• volume of losses from the potable water system. 
  

The breakdown of these volumes is shown in the following table.

Melbourne Water – Surface water diverted for bulk water supply

Component	Individual items	Volume (ML)
Total volume of water provided to the urban retail water authorities by Melbourne Water	potable water provided to City West Water	103,231
	potable water provided to South East Water	140,539
	potable water provided to Yarra Valley Water	149,306
	potable water provided to Western Water	10,433
	non-potable water provided to Yarra Valley Water - water taken from Maroondah aqueduct as direct supply to customers	329
	non-potable water provided to South East Water - water taken from Bunyip River as direct supply to customers	77
	subtotal: volume provided to urban retail water authorities	403,915
Total volume of losses and leakage	loss of potable water from major pipes - line item 19.2	38
	loss of potable water due to minor leaks - line item 19.3	21
	loss of potable water through service reservoir and tank dewatering - line item 19.20	163
	loss of potable water through operational activities - line item 19.20	2,131
	subtotal: losses from the potable water system	2,353
Total		406,268

Volumes were calculated using the weekly metered volume of bulk water supplied by Melbourne Water to urban retail water authorities. Metered volumes are based on Melbourne Water bulk meters located at the interface between Melbourne Water and each of the retail water authorities. 

Refer to the individual line item quantification approaches (as shown in the table) for the methods used to estimate losses from the potable water system.

Nil.

Volumes shown in the above table are based on flow meter measurements. The flow meters are generally ultrasonic flow meters for larger pipes (greater than 600 mm diameter) and magnetic flow meters for smaller pipes (less than 600 mm diameter). Both types of meters have an accuracy of +/– 1% as reported by the manufacturers.

Western Water metering database and Southern Rural Water database.

Western Water.

The volume of surface water diverted for urban supply was calculated using the weekly metered volume of surface water diverted from the Merrimu, Rosslynne, Pykes Creek, Kerrie, Djerriwarrah, Garden Hut, and Wright reservoirs and treated at the Myrniong, Merrimu, Rosslyne, Romsey and Lancefield water filtration plants (WFP). It also includes water diverted from Macedon and Mt Macedon storages to supplement surface water storages in Woodend. Meters are located on outlet pipes from reservoirs.

Western Water–surface water taken for bulk water supply

Surface water intake point	Water filtration plant	Volume (ML)
Forster and Wright reservoirs	Romsey	32
Garden Hut Creek Reservoir	Lancefield1	95
Kerrie Reservoir	Romsey	371
Macedon and Mt Macedon storages	Reservoir C	250
Merrimu and Djerriwarrh reservoirs	Merrimu2	1,707
Pykes Creek Reservoir	Myrniong	39
Rosslynne Reservoir	Rosslynne	50
Total		2,544

^1–2 This volume included non-potable and potable water supplied to users.

Nil.

Uncertainty is +/– 5% in accordance with the manufacturer's annual bulk meter test.